Georgetown Door Lite - Steel and Fiberglass Doors

Bullseye Lites Now Available For Fiberglass and Steel Doors

The Georgetown Door Lite® can now enhance your entranceway with beauty and elegance in either a fiberglass or steel entry door. The Georgetown Door Lite® can be ordered pre-installed in many brand name doors or purchased separately for installation into existing doors. Check with your local home improvement center, building supply store, or contact us for availability. If purchased separately for installation into existing doors, specify tan frame for textured, stainable doors or white frame for smooth, painted doors. Meets ANSI Z97.1 1986 (R1994) standard for safety.

Click on photos to enlarge

TAN FRAME

WHITE FRAME


	The tan door lite frame requires finishing. If staining, use gel stains with two topcoats of an acrylic polyurethane. Read cleaning instructions on this site for proper care and cleaning of the bullseye portion.		White frames require no finishing. If painting, use an acrylic primer labeled specifically "for plastic" and two topcoats of acrylic paint. Read cleaning instructions on this site for proper care and cleaning of the bullseye portion.


	EASY INSTALLATION INSTRUCTIONS The Georgetown Door Lite® is held in place by either a tan or white frame. A cut out opening of 9"w x 7"h is required for installation. Install into a door with the screws to the inside of the home. Do not over-tighten screws (15 pounds of torque is recommended). To install screw hole covers, insert shallow edge of covers and press firmly into place while assuring the cover aligns with the frame profile.

Warranted for 10 years against breakage • Meets ANSI Z97.1 1984 (R1994) standard for safety.
6"x 8"/ 8"x 6" size x ½" thick available now • Made in the U.S.A.

fiberglass door fiberglass door fiberglass door fiberglass door fiberglass door fiberglass door fiberglass door